Toyota G & H Chip OBDII Programming Dongle / Remote & Transponder Programming SLK

SLK-PM-GHAAK

The Toyota G and For Toyota H Chip Vehicle OBD Remote Key Programming Device supports programming both For Toyota G and For Toyota H chip vehicle via OBDII port.

Can add a transponder key or remote for Toyota vehicle with Toyota G and H (4D/67/68/72(G)) chip. NOTE: Not for all key lost
How To Use:

• To Add Another Transponder Key
  • Flip switch on the programmer to the LEFT.
  • Close all doors.
  • Insert the original key into the ignition and turn the key to the ON position.
  • Insert the programmer into the OBDII port. The programmer will beep twice indicating the beginning of the programming process. After a short pause, the programmer will beep several more times and the vehicle’s anti-theft light will illuminate.
  • Once the anti-theft light turns on, remove the customer’s original key (anti-theft light will flash) and insert the new key into the ignition (DO NOT TURN KEY). Anti-theft light will extinguish when key has been programmed.
• To Program New Remote
  • Flip switch on the programmer to the RIGHT.
  • Close all doors.
  • Insert the original key into the ignition and turn the key to the ON position.
  • Insert the programmer into the OBDII port. The programmer will beep twice indicating the beginning of the programming process. After a short pause, the programmer will beep several more times and the vehicle’s anti-theft light will illuminate.
  • Open the driver’s door. The programmer will begin beeping.
  • Press both the LOCK and UNLOCK buttons at the same time on the new remote.
  • Release both buttons.
  • Press the LOCK button.